On 04/17/2018 gsimmis@gmail.com wrote:

Very bright, solid built, good instructions, except their wire colors didn't match mine. Good kit. However, why did they not run the wires out the center of the rig instead of the ends? especially the way they have it installed (floating below headlight)? With them out the ends, I had to bend the wires around and behind the strip, I tied them tight with a small wire strap, and led the wires to the center, to follow the bracket up and to connections. The ty-wraps were ugly so used "goop" to mold the end, and glue the wire to the back. There is no finish on the outside ends of the bar... the end cut of the channel the strip is set in, with the wire (somewhat reinforced with a bit of shrink wrap) coming out the end. Anyway, wires should be at center of bar, not ends. beware as you will have to finish the wires/exposed ends of strip to make it look proper.