On 04/26/2012 Michael6706 wrote:

Well first thing I love the way it looks on the bike. It gives it a mean low profile look. However It took about 3 hours to get on and the baron on the inside was the wrong size. Had to swap out barons on my other bracket to get it to fit. But after all the work it looks great!

On 04/06/2012 LJohn2 wrote:

To ME !!!!

On 10/05/2011 RI REDBALL wrote:

lowered bike 3" and shock link bottomed out pushing out of my garage ,exhaust scrapped around a some what easy corner so I moved link to the 2" position and seems ok

On 06/04/2011 wingsbc wrote:

My favorite add on. Dropped it 2" and its perfect. Any lower would be no good as it is now i have to put my feet on the ground and stand up to roll it over speedbumps otherwise it would bottom out. This part drastically improves the look of the 900s rear end.

On 04/18/2011 noelflowers wrote:

it a lowering kit not much else has a lot of dents in the metal and powder coating was chiped where bearings were put in.

On 04/15/2011 mazdadragger26 wrote:

changes the feel of the bike a little not enough to worry about i went with the full 3 inches and absolutly love the after results only problem was i had to dremel the slots for the bolt to fit but overall good product

On 03/17/2010 bustcard wrote:

Has a negative impact on the lean and ground clearance and the bike is more apt to bottom out on bumps. Lokks sick and also changes the feel of the bike.

On 12/27/2009 johnforbes wrote:

love it makes the bike look like a road bike insead of a dirt bike. but you should by a 27mm socket for the upper arm. and if you op to lower it the two inches you might want to cut of the one inch setting for extra clearance

On 11/19/2009 beecher clemens wrote:

bj clemens excellent product .make my bike look so much better................

On 08/30/2009 darrelp900 wrote:

This was a little more of a pain in the ass to install than the reviews led me to believe, but once it was finally on, the look was great. BTW, the one you'll get isn't the one from the picture.

On 06/09/2009 joesk wrote:

Hmm think they might have sent me the wrong one. But still it was easy to install, but it only has 2 settings (2 and 3 inches) Don't know who makes the one pictured above. The one they sent is the Britt one with slots not holes. So maybe they have wrong picture and description?

On 01/25/2009 Adam wrote:

Easy to install. Make the bike look so much better.

On 10/27/2008 ufodriver2 wrote:

1" or 2: is good, anymore and your scrapin' things

On 10/27/2008 mikester65 wrote:

2" makes all the difference!

On 10/27/2008 drock101 wrote:

The vulcan sits too high stock. This solved the problem comfortably and quickly

On 10/27/2008 bigthumper1 wrote:

really makes your bike look low down

On 10/10/2008 Mathew Fairburn wrote:

very easy to install took me about and hour and ahalf. works very well made my bike look that much better.

On 10/07/2008 TONY OPPSS wrote:

THIS KIT IS REALY NICE AND GOOD TO YOU USE. IT WAS REALY SIMPLE TO PUT IT ON AND MY BIKE LOOKS SO MUCH BETTER WITH IT.