Please call our store at TOLL FREE (888) 486-6326 to find great prices on helmets.

- Select Brand - AVON BRIDGESTONE DUNLOP IRC METZELER MICHELIN SHINKO VEE RUBBER

NOW G5 have High level mix colors and more vivid, brighter LED strip
Manufacturer reprogram patterns , redesign the IC board and wire with connector. EASY to install.
Feature:
* Integrated trun signal /Brake light . 3 in one design.
* Newest Hybrid SMD 5050 1W?Flash effect better then active SMD RGB 5050 0.5W
Old SMD is each lamp has 3 bright light-emitting crystal.
REVO Hybrid SMD plus ring crystal around the 3 bright.
* PLUG-AND-GO "No wiring stuff" WORKS WITH PASSENGER SEAT ALSO.
*REVO Knight Rider lights has exclusive new colorful management chip in each SMD backside.
*Multicolor and multi function. New one flows from light to light creatig a continuous stream of light.
*21 model with Remote Control.
* It has mix colors--red, blue, green, daisy ,pink ,purple and white.
* Auto run and selection mode can be changed in circulation pattern and can also be fixed in a certain model.
* Available holding on Red/Green/Blue color and acts as a running light , when you hit turn signal light or brake , it will switches to blinker mode.
* If you won't ride with the remote,You setting someone model that you like and it would be memory.Then system will be auto run when you ride next time.
* REVO Knight Rider kit has LED strip / Remote control/ Wire harness jointer
* Wireless Remote Control: Up down left right 4 buttons
1. Button D for power switch.
2. Button B for Auto run pattern and changing effort.
3. Button C for different pattern, you can choose some kinds circulatory.
4. Button. A for slowdown pattern changing effort.
* The kit is unlike any LED kit you has seen before. It's definately light years ahead of the our Gen I kit from what you have seen my ebay store.Its more of light bar and when the patterns move its blends very well almost as if you are looking at a LCD screen. The kit is all plug and play, it plugs into the harness right at the seat, all you have to do is remove the seat and the harness is there. No splicing in anything from there the signals, brakes and hazzards all light up. It mounts under the rear cowl via double sided tape that comes already on it, just peel and stick it.
* Length: 54CM 48 pcs of 5050 Hybrid SMD RGB
* Material:Taiwan 5050 Hybrid RGB SMD lamps
* Brightness:5000MCD / light
* 6 months warranty
COME WITH:
1pc 54CM LED strip & remote control with wire harness(M109R/M1800R use only)


INSTRUCTIONS:
1. Please disassemble and assemble this product with caution
2. Please plug in the connector and test the product before assembling.
3. If the product does not function properly, please contact us.
4.Please do not bend or twist the light bar
5. Inside the light bar, there is a circuit board. It contains not only the chip.

M-109 "FLATZ" TURN SIGNALS / BLACK (PAIR) $209.95 View Item

REVO INTEGRATED LED CLEAR OR SMOKE TAIL LIGHT(comes with Flash Relay) $169.95 View Item

MULTI COLOR PLUG AND PLAY LED KIT FOR SUZUKI BOULEVARD M109R / VZR1800 $349.95 View Item

SMOKE TAILLIGHT KIT WITH RED INTEGRATED TURN SIGNALS FOR M109R / 1 left $149.95 View Item