Please call our store at TOLL FREE (888) 486-6326 to find great prices on helmets.
This item may be used with the following bikes:
On April 3, 2012 jert72 wrote:
Overall the look of the Headlight is Excellent, matching the wires up required me to use some crimp connectors with flat ends so I didn't have to remove the Stock harness. The stock headlight hides all the wiring for blinkers and gauges, so be prepared to have some extra wire to conceal. I lifted up the left side of the fuel tank on my 2005 Mean Streak and pulled back a considerable amount of wire which definitely helped clean up the cobbled mess of harnesses. Then used electrical tape to mask and seal up the wires, last I put a rubber/plastic heated shrink wrap around it for clean up the look of the wires. Overall I think the Headlight is great, but dealing with all the stock wires is a pain.
On August 15, 2011 BlackedOutVulcan wrote:
Had mine powder coated black and I customized my mounting bracket!!!!!!!!!
On March 17, 2010 bustcard wrote:
Mine is painted black. I had to drill out the hole for the cables to fit correctly.
On January 20, 2009 FL Vulcan Rider wrote:
This headlight looks so awesome. The installation was easy. On a 900 custom, the red wire on the headlight connects to the yellow wire on the bike. The yellow wire from the headlight connects to the red wire on the bike. The wiring is opposite. I drilled a center hole in the existing stock mounting bracket. The bike definitely looks a lot better.
On January 20, 2009 JC Meyer (FL Vulcan Rider) wrote:
I put this headlight on my Vulcan 900 Custom. It was very easy to install. The wires are backwards. The yellow wire goes to the red and the red wire goes to the yellow. I drilled a hole in the center front of the stock mounting plate. This mod took 1 hour to do. I drastically improves the look of the bike. My 900 custom looks a lot more stylish now. Definitely makes the bike look more aggressive and custom.